MagicQ MIDI/Timecode Interface
- Multipupose MIDI and SMPTE Timecode Interface
- MIDI notes and MIDI show control
- MIDI Timecode, EBU25, SMPTE30, NTSC30, Film 24
Connect via MIDI and SMTPE to MagicQ PC, MagicQ Mac or MagicQ consoles with MagicQ ChamSys MIDI/Timecode Interface. Supports MIDI in, MIDI out, SMPTE in, SMPTE out. Connects via USB.
The Interface supports all the common timecode protocols including EBU25, SMPTE30, NTSC30, Film 24.
MIDI input can be used to trigger playbacks and other features via MIDI notes. MagicQ can be programmed to trigger specific playbacks/cues/macros from specific MIDI notes.
The Interface supports standard MIDI Show Control for triggering Cues and Cue Stacks. This enables MagicQ to be used together with other consoles/software and systems that support the MIDI Show Control protocol.
MIDI data can be output from each Cue in Cue Stacks using simple MIDI strings.
The MagicQ MIDI/Timecode Interface is also available as a console option for fitting inside the one of the rear expansion modules of the MagicQ console. Note that due to space restrictions the SMPTE out is not supported in this configuration.
The MagicQ MIDI/Timecode Interface comes with a USB cable and MagicQ software CD.
Features
MIDI in DIN
Midi out DIN
MIDI thru DIN
SMTPE in via 3 pin XLR
SMPTE out via phono connector
Triggering of MagicQ features via MIDI notes
Triggering of MagicQ Cues / Cue Stacks via MIDI Show Control
Power status LED
Connection status LED
Specification
Powered from USB
Width: 130mm
Depth: 81mm
Height: 48mm
Weight: 0.25kg
Product Codes
0300-0005 MagicQ USB MIDI and Timecode Interface
0300-0028 MagicQ MIDI and Timecode Interface Console Option
